Subject: Controlling Debugging Messages (was Re: [xsl] how to create variable by comparing two variables using [not]) From: "Eliot Kimber ekimber@xxxxxxxxxxxx" <xsl-list-service@xxxxxxxxxxxxxxxxxxxxxx> Date: Mon, 15 Oct 2018 16:05:05 -0000 |
I was just about to post about this. In my XSLT 2 code I have historically used this pattern: <xsl:template match="foo"> <xsl:param name="doDebug" as="xs:boolean" tunnel="yes" select="false()"/> <xsl:if test="$doDebug"> <xsl:message>+ [DEBUG] Handling <xsl:value-of name="concat(name(..), '/', name(.))"/>...</xsl:message> <xsl:apply-templates> <xsl:with-param name="doDebug" as="xsl:boolean" tunnel="yes" select="$doDebug"/> </xsl:apply-templates> </xsl:template> This allows me to selectively turn debugging on and off in specific parts of the code but does require this somewhat heavy weight code. With @use-when, can I get the same level of local control? That is, with the above, I can add: <xsl:variable name="doDebug" as="xs:Boolean" select="true()"/> In any block to turn debugging on just there. If I understand the implications of static variables allowed in @use-when, the debugging switch is globally all-or-nothing, or at least global within a given package. Is that correct? If that is correct, is there a better way to do the selective, dynamically-controlled debug messaging shown above? Cheers, E. -- Eliot Kimber http://contrext.com o;?On 10/15/18, 9:08 AM, "Michael Kay mike@xxxxxxxxxxxx" <xsl-list-service@xxxxxxxxxxxxxxxxxxxxxx> wrote: These days you can do <xsl:message use-when="$DEBUG" ....> with $DEBUG defined as a static parameter. <xsl:param name="DEBUG" as="xs:boolean" static="true" select="false()"/> No need for the run-time check with xsl:if. You can also use xsl:assert to define assertions. In Saxon, assertion checking can be enabled from the command line using -ea. Michael Kay Saxonica > On 15 Oct 2018, at 14:54, Dave Pawson dave.pawson@xxxxxxxxx <xsl-list-service@xxxxxxxxxxxxxxxxxxxxxx> wrote: > > MIght even surround it with > <xsl:if test="$debug"> > > To ease insertion / removal when testing? > > HTH > On Mon, 15 Oct 2018 at 14:31, Wendell Piez wapiez@xxxxxxxxxxxxxxx > <xsl-list-service@xxxxxxxxxxxxxxxxxxxxxx> wrote: >> >> Eliot writes: >> >>> I also depend heavily on using messages to test my assumptions. >> >>> For example, I might do something like: >> >>> <xsl:message>+ [DEBUG] jpeg_few={$jpeg_few => string-join(', ')}</xsl:message> >>> <xsl:message>+ [DEBUG] jpeg_many={$jpeg_many => string-join(', ')}</xsl:message> >> >> This is a key technique when developing XSLT. The language is designed >> to "fail gracefully" most of the time -- which puts the burden on the >> programmer to ensure things don't fail catastrophically. :-) >> >> Cheers, Wendell >> >> On Sun, Oct 14, 2018 at 7:10 PM Eliot Kimber ekimber@xxxxxxxxxxxx >> <xsl-list-service@xxxxxxxxxxxxxxxxxxxxxx> wrote: >>> >>> Looking at the XPath 3 Functions and Operators specification and searching on "intersect" (hoping to also find "disjoint") I find this discussion: >>> >>> D.4.2.3 eg:value-except >>> eg:value-except( $arg1 as xs:anyAtomicType*, >>> $arg2 as xs:anyAtomicType*) as xs:anyAtomicType* >>> This function returns a sequence containing all the distinct items that appear in $arg1 but not in $arg2, in an arbitrary order. >>> >>> XSLT implementation >>> >>> <xsl:function name="eg:value-except" as="xs:anyAtomicType*"> >>> <xsl:param name="arg1" as="xs:anyAtomicType*"/> >>> <xsl:param name="arg2" as="xs:anyAtomicType*"/> >>> <xsl:sequence >>> select="fn:distinct-values($arg1[not(.=$arg2)])"/> >>> </xsl:function>Which is in https://www.w3.org/TR/xpath-functions-31/#other-functions (Appendix D). >>> >>> So basically >>> >>> distinct-values($jpeg_few[not(. = $jpeg_many)] >>> >>> Should give you the answer you seek. >>> >>> I agree with Mike that being obsessive about putting data types on all variables and function return values (and templates when the templates should return atomic types or specific element types) will help a lot. >>> >>> If your code is working without types but failing with them it means your code is "working" but probably not for the reasons you think. >>> >>> Working carefully through the stages of the expressions by setting each intermediate result into variable will help a lot. >>> >>> I also depend heavily on using messages to test my assumptions. >>> >>> For example, I might do something like: >>> >>> <xsl:message>+ [DEBUG] jpeg_few={$jpeg_few => string-join(', ')}</xsl:message> >>> <xsl:message>+ [DEBUG] jpeg_many={$jpeg_many => string-join(', ')}</xsl:message> >>> >>> Or if those lists are very long, use count() or get the first n items or whatever to make it clear that you're working with the values you think you are. >>> >>> Also, remember that <xsl:value-of> ({} in string result contexts) is different from <xsl:sequence>, which returns the actual value, not a string representation. >>> >>> For example, given a variable that is an attribute node, value-of will return string value of the attribute but xsl:sequence will return the attribute node and Saxon will serialize it as <attribute name="foo" value="bar"> (or something similar to that. >>> >>> It's easy to accidently create a sequence of attributes when what you wanted was a sequence of strings (or visa versa) and using xsl:value-of can obscure that mistake. >>> >>> I've also started using the XQuery-required explicating casting of values even though XSLT usually lets you get away with implicit casting, because it makes it clearer to me what my intent was (and makes it easier to copy XPath expressions into XQuery, if that's something you need to do). >>> >>> Cheers, >>> >>> Eliot >>> -- >>> Eliot Kimber >>> http://contrext.com >>> >>> >>> o;?On 10/14/18, 3:53 PM, "Dave Lang emaildavelang@xxxxxxxxx" <xsl-list-service@xxxxxxxxxxxxxxxxxxxxxx> wrote: >>> >>>> That error can only come from an expression that calls tokenize(). It's therefore clearly not your declaration of jpgs_in_xml_not_directories that's at fault. >>> >>> Fair enough - but when I run the transformation without that declaration >>> everything works fine. Is there something I can do to the variables that >>> are included in it to make the declaration work? >>> >>> >>> >>> >> >> >> >> -- >> Wendell Piez | http://www.wendellpiez.com >> XML | XSLT | electronic publishing >> Eat Your Vegetables >> _____oo_________o_o___ooooo____ooooooo_^ >> > > > > -- > Dave Pawson > XSLT XSL-FO FAQ. > Docbook FAQ.
Current Thread |
---|
|
<- Previous | Index | Next -> |
---|---|---|
Re: [xsl] Better "Report Map" Funct, Eliot Kimber ekimber | Thread | Re: Controlling Debugging Messages , Michael Kay mike@xxx |
Re: [xsl] how to create variable by, Michael Kay mike@xxx | Date | Re: Controlling Debugging Messages , Michael Kay mike@xxx |
Month |